|Price Note:||(inc. GST)|
|Make, Model:||Hino, 500 Series 2628 FM|
|Application(s):||Tanker, Water Truck, 6x4|
|Location:||Macksville, New South Wales|
|Last Modified:||16/05/2021 1:55:32 PM|
1 x only used 01 / 2015 Hino 500 Series – FM2628 – 7.9 litre, turbo / intercooled, 280hp, 6 speed ALLISON AUTOMATIC with air conditioning, a windscreen sun visor, weigh scale system (with in-cab digital read-out) and a reverse camera. 26,000kg GVM. 78,000 klms.
STOCK # 11745
Fitted with a NEW ALLQUIP WATER TRUCKS – 14,000 LITRE HEAVY DUTY STEEL WATER TANK
Australian Made Steel Tank: 14,000L Heavy duty steel tank - 14,000 litre fully baffled, steel water cartage transport tank. Tank to be primed inside and out and top coated in white 2 Pac paint finish. Tank features: 1 x 5mm steel Square 2 x 5mm offset heads welded with lifting lugs 3 x 5mm break design baffle with crawl hole 2x 5mm long baffles full length Tank to be mounted via heavy duty spring & solid tank mountings.
Hydraulic Water Pump Drive System: Hot shift - P.T.O. to suit automatic transmission. Hydraulic motor and hydraulic driven piston pump. Flow control valve, pressure relief valve and check valve. 120 litre hydraulic oil tank fitted with cartridge filter and sight gauge.
Water Pump: 100x65x250 Southern cross hydraulic drive – Heavy-duty cast iron pressure/transfer water pump, approximately 1,800 LPM at pump, total 60 MTR head and 86 PSI. Pump can pass solids up to 20mm. Water pump to be close coupled to hydraulic drive gear motor. Flexible bellows fitted between tank and pump to permit ease of removal of the pump if required and to isolate pump vibration.
Pump Speed Controller: Pump speed controller - Enables the driver to adjust the hydraulic driven water pump speed at will from the cabin. System capable of controlling hydraulic motor speed over the entire engine speed range and is also capable of being overridden by the accelerator pedal.
Suction: 3'' Suction - 80mm (3'') suction system with water valve and cam-locked inlet. System capable of filling tank from water supplies such as rivers and holding dams.
Spray Bar Main: Pipe work - 80mm (3'') pipe work to be hot dip galvanised. For quick and trouble-free maintenance, systems features bolted-on components and conveniently located external water ways.
Spray Bar Main: Centre spray - One 80mm (3'') rear centre fan spray. Fan spray, on roll groove and camlock fittings for full adjustment of spray. Fan spray to have adjustable clamp for controlling water volume, e.g. fine or heavy spray patterns
Spray Bar Main: Batter sprays - Two 80mm (3'')rear batter fan sprays. Sprays on roll groove and camlock fittings for full adjustment. Fan sprays to have adjustable clamp for controlling water volume, e.g. fine or heavy spray patterns.
Spray Bar Main: V-jet bar - 80mm (3'') pressure fed v-jet spray bar fitted with 12 brass v-jets and removable ends for flushing.
Pump Outlet: Pump outlet - 80mm (3'') fitted with 80mm wafer butterfly valve and cam-lock. System capable of emptying tank.
Controls: Cabin Controls - All fan sprays to be air over air actuated. Air switch bank mounted in stainless steel control box. Control box installed in an ease of use position in-cab.
Hose Reel: Manual hose reel 25mm – Heavy-duty high volume rewind hose reel, with industrial wash down hose and adjustable fire-fighting nozzle.
Tap Outlet: Tap outlet - Three quarter inch outlet with ball valve. (For concrete saw, pressure washers etc)
Sight Glass: Sight gauge - Water level sight gauge fitted into front and rear of tank.
Lid: 80mm Top fill system and funnel - Galvanised funnel, 80mm (3’’) hydrant and pump top fill system including regulation air gap and non-return check valve. Top fill to comply with water authority regulations. System can be used with hydrant stand-pipes, overhead gantry fill or self-filling with water pump.
Pressure Relief Valve: Pressure relief valve - 25mm (1'') (back to tank). Pressure relief valve allows continuous operation of the water pump even when all sprays are off thus preventing damage due to heat build-up and cavitation.
Rustproofing: Rust proofing - Metal sub frame and pipework to be hot dipped galvanized. All fittings to be made from non-corrosive materials such as brass and aluminium.
Engine Manufacturer: Hino
Fuel Type: Diesel
Drive Side: Right Hand Drive